Product Details:
Payment & Shipping Terms:
|
Materials: | Polyurethane Resin | Thickness: | Minimum 3mm, Customised As Clients Requirements |
---|---|---|---|
Color: | Red, Green, Blue, Etc | Service Life: | Minimum 6 Years |
Application: | Basketball Court ,Tennis Court , Badminton Court , Multi Purposed, Etc. | Name: | Synthetic Exterior Basketball Court Surfaces , Colored Modular Basketball Flooring |
High Light: | 3mm Basketball Court Flooring,Synthetic Basketball Court Flooring |
Outdoor Synthetic Basketball Court Flooring Surface Refresh
ITF Certified Silicone PU Court Surface for Stadium Volleyball/Basketball/Tennis/Badminton Court
Structure:Primer+buffer coat +top coat+Marking line
Normal color: green ,blue, red
Application: basketball court, badminton court, tennis court, volleyball court, futsal court etc.
Normal thickness:3-8mm
Lifespan: 8 years
Base:Concrete /Asphalt/Waterstone
Sports bring communities together. Turn your unused field or existing concrete court into a gathering place where all can play safely. Create a space that fosters friendships, strengthens values and builds champions.
Our Advantage |
1. Suitable for all weathers as well as elasticity and resilience, and can reduce the consumption of physical force and improve game results. |
2. Not faded, dusted or softened by ultraviolet ray, ozone or acid rain but keep its vivid color for quite a long period. |
3. Easy to install |
4. Maintain high quality in any season or under any temperature, it has a longer service time and higher field utilization rate. |
SPU classical is professional and elastic sport floor material conforms to the ergonomic principle,reach requirements of sport physical characteristics. It's structure characteristics is hard on the top while elastic on the bottom.Can be applied on concrete and asphalt base.
Product Data
No
|
Test Item
|
Test base
|
Test Standard
|
Test result
|
1
|
Surface Hardness(Shore A)
|
CNS
|
35-50
|
36
|
2
|
Ball rebounce
|
EN12235
|
≥90%
|
99.10%
|
3
|
Gloss
|
EN ISO2813
|
|
PASS
|
4
|
Shock Absorption
|
EN14808
|
25-75%
|
25.1
|
5
|
Vertical deformation
|
EN14809
|
≤6.0mm
|
0.27mm
|
6
|
Flexibility at low temperature
|
CNS
|
No crack(-35℃)
|
No crack
|
7
|
Tear resistance
|
CNS
|
≥15N/mm
|
17
|
8
|
Elogation at Break
|
CNS
|
≥200%
|
614%
|
9
|
Tensile strength
|
CNS
|
≥2.00Mpa
|
3.2Mpa
|
10
|
Resistance to Fire
|
CNS
|
1
|
1
|
1) High-crystalline silicone pu buffer coat
Yuanyang Sports adopt latest technology to develop reversible crystalline structure. Compare to similar products, the strethc factor is 3-5 times higher.With good elasticity and excellent texture.
2) Water-base top coat.
Pure water-base resin system,environmental protection.
3) Economic design
We will provide proper thickness and dosage according to your needs.A cost-effective product.
Substrate: concrete or asphalt base
Acid wash: wash the surface with hydrochloric acid , reduce the risk of cracking , finding faults.
Base primer or Water resistance coating : water proof, safe flooring from damages, fully penetrated ,strengthened substrate surface and increase adhesion.
Sealant : Reduce the risk of cracking
Cushion/Elastic Layer : Perfect elasticity , long lasting ,professional rebound ,excellent force of absorption
Strengthened Layer : Professional rebound cushion ,optimally soft and hard transition
Top layer : strong abrasion resistance and resilient , skid resistance , dirt resistance and wear resistance, environmental friendly.
Marking paint /divided the region : water based marking based more green .
1.Sub base layer prepared: The sub base layer is generally concrete or asphalt,
should be clean dry, flat , without cracks and stain before installation .Firstly clean the surface of concrete or asphalt very well and make it smooth also the gaps lines of concrete surface with the help of surface smoothing tools or machine and then wash it with water.
2. Acid Wash : Again wash the surface with hydrochloric acid its help to removes the small substance of sand from the surface and makes it more smooth hydrochloric acid is also helps to find out the faults and cracks on the concrete surface . Before using of this acid you must add water in it with proper proportion for example 1 part of acid and 4 part water, proper usage of acid is very important. After completing of acid wash , then again wash the surface with water and left the surface until perfect dryness.
3.Base premier / water resistance : This is very important step this PU material has ability to easily enter in to the small pores and gaps cracks of the concrete surface and penetrated in it. This component makes surface more stronger, and increase the adhesion of surface it can viscidity the flooring tightly to the sub base. Put the material on the surface and applied it with the help of rolling brush all over the surface including the gaps lines and cracks, this process makes safe the surface from the destruction occurs by t water for long period. The usage of water resistance material 0.2 kg per square meter. After finished water resistance step you should give a interval in construction about 3 hours until its perfect dryness
4.Sealant : Fill all the cracks and gaps lines of surface with silicon PU component and makes it smooth .Its reduced the risk of cracking which occurs with the climate change and provide more elasticity .
5.Cushion layer/elastic layer: Take the barrel into the court there is another bottle in side the barrel / bucket with cushion layer packet , liquid inside bottle called catalyst liquid (its use for speed up process of dryness and makes its hard as well ) so mixed catalyst liquid with SIPU component in the bucket very well with the help of blender or driller before paving it on base and then apply the material on the surface with perfect proportion and quantity applied the material on the surface with the help of floor squeegee and make it smooth and flat and left them for several hours until unless the stability of the layer .This layer provide professional rebound , perfect elasticity comfort and excellent force of absorption which helps to keep the sports floor from destruction for long time and making floor long lasting .
6.Strengthened layer: after finished the elastic layer there is another layer is called strengthened layer the making and process of construction of this layer is same like elastic layer but component of this layer has different characteristics and function its has professional rebound cushion optimally soft but hard transition which provide excellent and perfect re bouncing force and perfect hardness to surface, before paving this layer make sure the dryness and stability of elastic layer.
7.Top layer :Top layer of the SIPU sports floor is made by a two components one is curative agent and another is resin agent , mixed the two components in barrel together with proper proportion, one part of curving agent and nine parts resin and also put some quartz sand in barrel and mixed together before applying on strengthened layer. After the mixing apply this mixture on the strengthened layer very carefully and make it smooth and flat with rolling brush and coated the surface two times for better result and left it for dryness .Top layer has environmental friendly, water resistance , wear resistance , dirt proof ,anti-slip proof characteristics its also long lasting, so colours will be not fade .
8.Marking paint: mark the lines or divide the region with water based polyurethane paint which has good adhesion marking paint brush or spray with out roller marks and feel good effects. Different line you draw means flooring function, you can also draw different lines at same time on same surface for multipurpose.
1. Specialized in manufacturing sports courts & running track from 2006, total area 30000m2;
2. Largest auto manufacturing base in China, and annual output 50,000 tons;
3. Can produce more than 80 tons PU materials per day;
4. Dust-free manufacturing shop, environmental manufacturing technique.
5. One stop service to clients, from design, proposal , budget, shipment , technician support , installaiton , maintainence etc.
Application Area
Widely used in basketball, tennis courts , volleyball court , badminton court , fustal court and other field laying, also can be pavied on the bottom of the rubber base and the low-density rubber mat.
1) Are you manufacturer or trader?
Manufacturer, we have one big production foundation in Zhongshan city, with 80 tons pu materials turnout per day.
2) What is the advantage of your factory?
Our products are odorless and non-toxic , we can offer materials for every kinds of SPU venues, running track.We have more than 13 years' development and production history
3) Any discount for PU materials ?
Normally, we would give few discount for our New customer. and we can offer few refound in the end of year on the basic of clients annuel sales amount.
Contact Person: Serena
Tel: +8618664805201